Euchner EKS FSA with PROFINET interface Manual de usuario descargar pdf (Pagina 37)

Manual EKS Electronic-Key Adapter PROFINET

109283-01-04/10 Subject to technical modifications Page 37/44

9 Analysis and Assignment of DCP Name via Web Interface

As an alternative to communication via PROFINET, it is possible to communicate with the EKS Electronic-Key

adapter from a PC with the aid of web browser via TCP/IP. The feature can be used, e.g., for analysis, to read

data from the memory in the Electronic-Key and to display them in the browser. The DCP name for the

Electronic-Key adapter can also be set via the web browser (see also DIP switch settings in section 4.4.3).

This process is described in detail in the following sections.

9.1 Network settings for a configuration PC with Windows

Information!

f It is assumed that you connect the PC to the EKS Electronic-Key adapter as shown in the following

example.

f For connection, you need a (Cat 5) patch cable with crossed cables (crossover).

f You must first modify the network settings on the PC so that the web interface can be opened.

f Enter IP address for the PC from 192.168.1.2 to 192.168.1.254.

f Enter subnet mask for the PC as 255.255.255.0

Figure 7: Configuration PC connection

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Sin comentarios

Euchner EKS FSA with PROFINET interface Manual de usuario Pagina 37