Euchner EKS FSA with Ethernet Interface Manual de usuario descargar pdf (Pagina 13)

Manual EKS Electronic-Key Adapter Ethernet

4.3 Connector configuration

4.3.1 Connection socket for Ethernet interface

The connection on the Electronic-Key adapter is realized as an RJ45 (8P8C) socket corresponding to

ISO IEC 61754-24.

Pin Function

1 Transmit Data + (TD+)

2 Transmit Data - (TD-)

3 Receive Data + (RD+)

6 Receive Data - (RD-)

4.3.2 Plug-in screw terminals for power supply

Information!

The coded plug for connection of the power supply is included with the Electronic-Key adapter .

Pin Designation Function

1 UB Power supply DC + 24 V

2 0V Power supply DC 0 V

123

Coded plug, 3-pin

with screw terminals

Conductor cross-section

0.14 ... 1.5 mm²

Tightening torque 0.22 Nm

3 Function earth Electrically connected to the housing

4.3.3 Plug-in screw terminals for outputs LA1/LA2 and LB1/LB2 (EKS FSA only)

Information!

The coded plug for the connection of the outputs is included with the Electronic-Key adapter .

Channel Pin Function

Normally open contact

channel LA

Coded plug 2 x 2-pin

with screw terminals

Conductor cross-section

0.14 … 1.5 mm²

Tightening torque 0.22 Nm

Normally open contact

channel LB

100420-02-01/09 Subject to technical modifications Page 13/40

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Sin comentarios

Euchner EKS FSA with Ethernet Interface Manual de usuario Pagina 13