Euchner EKS FSA with Ethernet Interface Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
Manual EKS Electronic-Key Adapter Ethernet
8.3.3 Reading the serial number
The Electronic-Key read/write contains a unique 8-byte serial number. This number is written by laser during the
Electronic-Key production process and can never be changed or deleted. The serial number is used for secure
distinction of every single Electronic-Key. It is necessary that all 8 bytes are completely evaluated for reliable
differentiation. The serial number is appended to the freely programmable user data.
The serial number can be read by entering the start address byte number 116 and the number of bytes 8 (see
section 8.3.2).
8.3.4 Reading the key status
Command message (message core, PC/PLC (control system) EKS, see Figure 6):
f Ek (device addr.) (00
hex
, 00
hex
, 00
hex
)
Reply message (message core, EKS PC/PLC (control system), see Figure 7):
There is only one reply for this command:
f Ek (device addr.) (00
hex
, 00
hex
) (status number)
Content
Byte no. Description
ASCII hexadecimal decimal
0 Number of message bytes 07 7
1
2
Command identification
E
k
45
6B
69
107
3 Device address 01 1
4
5
6
Padding data
00
00
00
0
0
0
Figure 13: Command message read Electronic-Key status (message core)
Content
Byte no. Description
ASCII hexadecimal decimal
0 Number of message bytes 07 7
1
2
Command identification
E
k
45
6B
69
107
3 Device address 01 1
4
5
Padding data
00
00
0
0
6 Status number *
Figure 14: Reply message read Electronic-Key status - Status (message core)
* Status number 01
hex
: EKS_KEY_IN
02
hex
: EKS_KEY_OUT
03
hex
: EKS_KEY_OTHER
Information!
The current status of the EKS Electronic-Key can be polled with Ek. This status message is sent as
soon as the EKS Electronic-Key is removed or inserted.
100420-02-01/09 Subject to technical modifications Page 37/40
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios