Euchner AS-i Safety Output Relay with four standard inputs Manual de usuario descargar pdf (Pagina 15)

AS-i Safety Output Relay with four standard inputs

Product Description

Subject to reasonable modifications due to technical advances Id.-No.: 103573 Issue date - 28.5.2009 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316

4.5 Operating interface

4.6 Indicators

Switch to select the operational mode:

PRG

Safety relevant AS-i address can be programmed

Secure operation not possible.

RUN

Secure operation possible, non-safety relevant AS-i address can be

programmed.

Addressing jack (ADDR)

Indicators

Display Meaning

PWR off No supply power

green 1 Hz flashing Operational power on, safety relevant AS-i address and/or

AS-i AB address is “0”

green (on) Supply power on

Fault off AS-i communication OK

red (on) No data exchange with the AB slave

Out off Output Relay switched off

green 1 Hz flashing Error lock state, waiting for start signal, after transmission

of start signal Output Relay switches on

green 8 Hz flashing The device is in an un-lockable error state. The device

resumes regular operation after the Monitor sent the sig-

nal “error unlock”.

green (on) Output Relay switched on

Alarm off AS-i output bit A0 not set

red (on) AS-i output bit A0 set

I1, I2, I3, 1.Y1 off Corresponding input is not on

yellow

cyclic flashing

Switch set to PRG

yellow (on) Corresponding input is on

I 1I 3

1.Y1I

–

1.13

ASI

1.14

ASI

–

1.23

1.Y1

1.24

ADDR

RUN PRG

FAULT ALARM

PWR

OUT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios

Euchner AS-i Safety Output Relay with four standard inputs Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Euchner AS-i Safety Output Relay with four standard inputs