Euchner AS-i 3.0 Command Interface Manual de usuario descargar pdf (Pagina 47)

AS-i 3.0 Command Interface Commands of the Command Interface

Subject to reasonable modifications due to technical advances Id.-No.: 102875 Issue date - 3.12.2007 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316

Meaning of bit B:

B = 0 Single AS-i slave or A-slave

B = 1 B-slave

4.5.7 Set list of projected slaves (SET_LPS and SET_LPS_R6 (6Bh))

The command SET_LPS_R6 (6Bh) differs from the command SET-LPs in:

• no empty byte (3)

• half so long LPS list

With the bit 2

is selected if the upper (=1) or lower (=0) part of the LCS is read.

With this call, the list of configured AS-i slaves is transferred for permanent storage

in the EEPROM of the master.

When this command is executed, the AS-i master changes to the offline phase and

then changes back to the normal mode (warm restart).

This command can only be executed in the configuration mode.

Request (if O ≡ 0)

byte

129

2T 0 circuit

300

47A6A5A4A3A2A1A –

……

11 31B 30B 29B 28B 27B 26B 25B 24B

Request (if O ≡ 1)

byte

129

2T 1 circuit

300

4 – 1A 2A 3A 4A 5A 6A 7A

……

11 24B 25B 26B 27B 28B 29B 30B 31B

Response

byte

129

2T result

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 97 98

Sin comentarios

Euchner AS-i 3.0 Command Interface Manual de usuario Pagina 47